Vontron 75 GPD membrane






- Stock: In Stock
- Model: Membrana Vontron 75 GPD
- Weight: 1.80kg
- Dimensions: 38.00cm x 10.00cm x 10.00cm
Vontron 75 GPD Membrane for Reverse Osmosis
This domestic reverse osmosis membrane is independently developed by VONTRON, which can work under very low pressure condition, it is suitable to be equipped in domestic water devices, in hospitals and laboratories to process low salt water sources.
Note: individual membrane water producing element varied within the range of -20% to 20%
Test conditions :
test pressure ………………………………………………… 60psi (0.41MPa)
The temperature of the test fluid …………………. ………… 25 ℃
Test concentration (NaCl) ……………………………… 250ppm
Test pH value ……………………………………………… 6.5 ~ 8.5
Recovery individual membrane element …………… 15%
Replacement for the following reverse osmosis devices:
Alice, Starline, Galileu, Alison, Sintra, Senna 2.0, Advance 2, Sintra desktop, Osmolux, among others
Tips:
- Do not forget that it can only work with drinking water bacteriologically.
- Don't forget to maintain your osmosis equipment on a regular basis. Disinfecting the membrane in the filter change process. The life of its membrane depends on it.
- To remove the old membrane, it is best to use a parrot beak or pliers holding the membrane tube and pulling it out while turning to facilitate its removal.
- Clean the inside of the membrane holder (use a dishwasher brush to remove everything that has adhered to the wall of the membrane and carry out a disinfection.